The difference between single glazing and double glazing is the number of panes. Single glazing has one pane of glass, while double glazing has two panes sealed together with an insulating gap between them, which cuts heat loss, reduces outside noise and keeps the inside glass warmer so less condensation forms. Cristal Windows supplies and installs double glazed windows across Hampshire, Surrey and Berkshire from its base in Fleet.
Plenty of homes in our area still have single glazed windows, from Victorian terraces in Farnham and Guildford to cottages around Alton and Hartley Wintney. This guide compares the two in plain terms so you can decide whether replacing single glazing with double glazing is worth it for your home.
How single and double glazing are made
Single glazing is one sheet of glass held in the frame. It lets light in and keeps the weather out, but the glass itself does very little to stop heat escaping, because there is nothing between the warm room and the cold air outside except a few millimetres of glass.
Double glazing uses two panes of glass separated by an insulating chamber, typically filled with argon gas. The two panes are sealed together as one unit, so the gap stays dry and clean. Modern units add a few more features that make a real difference:
- Low-emissivity (Low-E) coated glass, which reflects heat back into the room
- Argon gas in the gap, which slows heat transfer far more effectively than air
- Warm edge spacer bars around the edge of the unit, which help prevent condensation around the frame
Single glazing vs double glazing compared
The list below is a quick side by side guide. The sections after it explain each point in more detail.
- Heat loss: single glazing loses heat quickly; double glazing keeps far more heat in the room.
- Noise: single glazing lets more traffic and street noise through; double glazing gives a noticeable reduction.
- Condensation: single glazed glass gets cold and often runs with water on winter mornings; the inside pane of double glazing stays warmer.
- Security: older single glazed windows often have basic catches; modern double glazed windows come with multi-point locking and internally beaded units.
- Character: original single glazing can suit listed and period homes; double glazing can be made in styles that match period properties.
Heat loss and energy efficiency
Window performance is measured as a U-value: the lower the number, the less heat escapes. Single glazing typically has a U-value of around 5.0 to 5.8 W/m²K. The best double glazed windows now achieve U-values as low as 1.2 W/m²K, with energy ratings from A to A++. In practice that means warmer rooms, fewer cold spots by the window and less work for your heating.
All Cristal Windows products are available with A-rated sealed units as standard, with A+ and A++ upgrades available. If you want to go further still, triple glazed windows add a third pane.
Noise
The sealed gap between two panes acts as an acoustic barrier, so double glazing noticeably reduces traffic noise compared with a single pane. This matters most for homes near busy roads or railway lines. For very noisy locations, acoustic glass can be specified inside the double glazed unit.
Condensation
Condensation forms when warm, moist air inside the home meets a cold surface. A single pane of glass gets very cold in winter, which is why single glazed windows so often stream with water first thing in the morning. On timber frames that water can soak into the joints and damage the paint. Because the inside pane of double glazing stays warmer, much less condensation forms. Our page on condensation explains the causes and how to keep humidity under control.
Security
Many older single glazed windows rely on simple catches. Modern double glazed windows from Cristal Windows come with multi-point locking systems and internally beaded sealed units, which means the glass can only be removed from inside your home. All our installations meet current Building Regulations for security.
Is single glazing ever the better choice
Single glazing is rarely chosen for a new installation today, but there are times when keeping it makes sense. On a listed building, the original glass and frames may be protected, and changing them can need consent. In some conservation areas the council expects windows on the front of the house to keep a traditional look.
That does not always rule out double glazing. Slim, traditionally styled double glazed windows, sliding sash designs and timber windows can often keep the character of a period home. Rules vary between councils, so check before you order. Our guide for homeowners in conservation areas explains what to ask, and our free survey flags any restrictions early.
How to tell if your windows are single or double glazed
If you have just moved in, or you are not sure what you have, there are a few simple checks you can make.
- Look at the edge of the glass. Double glazing has a spacer bar running around the edge between the two panes, often silver, black or white.
- Use the reflection test. Hold a lighter or a torch close to the glass. Single glazing shows one pair of reflections; double glazing shows two pairs.
- Feel the glass on a cold day. Single glazing feels very cold to the touch and often has condensation on the inside.
- Check the paperwork. Windows fitted by a FENSA registered installer come with a certificate, and the date tells you how old the units are.
Even if your windows are already double glazed, units installed before 2002 likely fall below current energy efficiency standards, so it can still be worth comparing them with modern double glazed windows.
Replacing single glazing with double glazing
For most homes, replacing single glazed windows is a straightforward job. Replacing windows like for like is usually permitted development, so most homeowners outside conservation areas and listed buildings do not need planning permission. Using a FENSA registered installer means the work is certified for Building Regulations compliance.
Most homes can be fully fitted within one to three days depending on the number of windows, and each window typically takes between one and two hours to remove and replace. Cristal Windows uses directly employed installers, never subcontractors, and every installation comes with a guarantee covering both the product and the installation.
The cost depends on the number and size of your windows, the frame material, the style and the glass you choose. The quickest way to get an idea is our instant online quote.
Frequently asked questions
Is double glazing better than single glazing
For almost every home, yes. Double glazing keeps more heat in, reduces outside noise, cuts condensation on the glass and comes with stronger locks than most older single glazed windows.
Can I replace single glazing with double glazing without planning permission
In most cases, yes. Replacing windows like for like is usually permitted development. Listed buildings and some conservation areas are the main exceptions, so check with your council first.
How do I know if my windows are single glazed
Look for a spacer bar between two panes at the edge of the glass, or hold a light near the glass: two pairs of reflections means double glazing, one pair means single glazing.
Can you fit double glazing in a period home
Yes. Cristal Windows supplies sliding sash, flush casement and timber windows that suit many period homes across Hampshire, Surrey and Berkshire.
Book a free survey with Cristal Windows
Cristal Windows is a family-run business based in Fleet with over 40 years of experience, accredited by FENSA, Which? Trusted Trader and the GGF. We fit windows within about 30 miles of Fleet, including Farnborough, Farnham, Aldershot, Camberley, Basingstoke, Guildford and Woking, and we can show you the difference new double glazing would make to your home.
Get an instant online quote or contact us to book a free survey.













